BBTSW - PAINT REMOVER, DX585
- MSDS: BBTSW
- Manufacturer: PPG INDUSTRIES
- Product Name: PAINT REMOVER, DX585
- National Stock Number: 8010-00F006021
Product Identification
Product ID:PAINT REMOVER, DX585
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006021
MSDS Number: BBTSW
Responsible Party
Emergency Phone: (304) 843-1300
Cage: EO498
Contractor
Telephone: 412-492-5555
Cage: EO498
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 10%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 40%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
AROMATIC HYDROCARBON
Fraction By Weight: <5%
ACGIH TLV: 100 PPM
PROPYLENE DICHLORIDE (SARA III)
CAS: 78-87-5
RTECS: TX9625000
Fraction By Weight: 20%
OSHA PEL 75 PPM/110 STEL
ACGIH TLV: 75 PPM/110STEL; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:SKIN, EYE & RESP TRACT IRRIT/CNS
DEPRESSION/HEADACHE/DIZZINESS/STAGGERING GAIT/CONFUSION OR COMA.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. NOTIFY
PHYSICIAN. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. TAKE TO
PHYSICIAN FOR DEFINITIVE MEDCIAL TREATMENT. SKIN: WASH WITH WATER.
REMOVE CONTAMINATED CLOTHING. CONSULT PHYSICIAN.
Fire Fighting
Flash Point:NO FLASH TO BOIL
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES
ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP & POSSIBLE AUTOIGNITION OR EXPLOSION.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES, & ELECTRICAL, STATIC OR FRICTIAL SPARKS). AVOID BREATHING
VAPORS. VENTILATE AREA. REMOVE WITH INERT ABRBENT AND NON-SPARKING
TOOLS.
Handling
Handling and Storage Precautions:HALOGENATED HYDROCARBON SOLVENTS CAN
EXPLODE IF USED W/ALUMINUM COMPONENTS IN A PRESSURIZED FLD SYSTEM
PUMPS, HEATERS, VALVES, SPRAY GUNS, TANKS
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING/INHALING CONTENTS CAN BE HARMFUL OR FATAL. DON'T TAKE
INTERNALLY. AVOID FREFALL OF LIQUIDS IN EXCESS OF A FEW INCHES.
DON'T STORE >100F.
Exposure Controls
Respiratory Protection:CONFINED AREAS, AIR SUPPLIED RESPIRATORS IS
RECOMMENDED.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
MSDS DATE: 02/03/84. WT/GAL: 9.05. CONTAINS METHYLENE CHLORIDE WHICH
MAY DECREASE THE OXYGEN CARRYING CAPACITY OF THE BLOO FIREFIGHTERS
SHOULD SCBA.
Chemical Properties
Boiling Pt:B.P. Text:39-285C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:97%
Stability
Stability Indicator/Materials to Avoid:YES
DON'T USE WITH ALUMINUM PUMPS, VALVES, TANKS
Stability Condition to Avoid:OPEN FLAMES, ELECTRIC ARCS & HOT SURFACES.
Hazardous Decomposition Products:CO, HYDROGEN CHLORIDE, CHLORINATED
PRODUCTS, CHLORINE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.